EASY SEAL

Novex EASY SEAL is used to revitalise, recolour, and seal both new and old concrete surfaces, providing protection against stains.

It can be applied to driveways, paths, exposed aggregate, slate, concrete pavers, and similar masonry surfaces.

Novex EASY SEAL offers fast drying, UV resistance, a low sheen finish, and good resistance to car tyre marking and efflorescence.

We would expect EASY SEAL CONCRETE STAIN/SEALER used as a glaze to last at least 2-3 years on average. This varies considerably as every customer’s interpretation differs greatly as to what they consider as faded/worn. We have found that the reseal time frame can vary from 1 year to 4 years. This is totally dependent on the customer perception (even though EASY SEAL CONCRETE STAIN/SEALER will in fact still be protecting the surfaces). We recommend you apply a maintenance coat at least every two years.

Yes, please see instructions on recoating old, sealed surfaces as they become very hard and need reactivating to get new sealer to bond

Wipe with clean EASY SEAL THINNER immediately, don’t let EASY SEAL CONCRETE STAIN/SEALER dry before treating. The longer it’s left the harder it will be to get off. Take care when removing from painted surfaces as EASY SEAL THINNER may affect the paint.

Remove oil spill immediately by wiping with a soft, clean cloth before it reacts with EASY SEAL CONCRETE STAIN/SEALER. If you are unable to clean up before damage has been done to sealer, simply reapply EASY SEAL CONCRETE STAIN/SEALER to the affected area after removal of any stains.

Yes, it's available in both coloured and clear options to suit different preferences and needs.

It's not recommended for garage floors with smooth, non-porous steel-trowelled surfaces due to potential issues with sealer penetration and adhesion.

No, it's not suitable for factory glazed terracotta tiles.

It's used to revitalise, protect, recolour, and seal new and old concrete surfaces, including driveways, paths, and concrete pavers.

It's generally recommended to apply two coats, although additional coats may be necessary for certain surfaces.

It's touch dry in approximately 30 minutes and can be recoated after 2 hours. Avoid foot traffic for 4 hours and vehicle traffic for 48 hours.

Clean up can be done using Novex EASY SEAL Prep Wash & Thinner or a universal thinner. Dispose of leftover liquid responsibly, avoiding stormwater drains and waterways.

It can be applied using a brush, broom, or roller. It's important to stir thoroughly before application and follow the mixing instructions for tinted options.