top of page
Search

How and Why to Use NOVEX ASH FINISH – Asphalt Recolouring Made Simple

  • NOVEX
  • Jul 25
  • 2 min read
How and Why to Use NOVEX ASH FINISH – Asphalt Recolouring Made Simple
How and Why to Use NOVEX ASH FINISH – Asphalt Recolouring Made Simple

Asphalt Recolouring Made Simple

If you’ve got a tired-looking asphalt driveway or path that’s faded to grey, patchy, or showing signs of old repairs, NOVEX ASH FINISH is here to bring it back to life.


NOVEX ASH FINISH is a water-based coating that’s designed to recolour and refresh old asphalt surfaces, giving them a smart, low-sheen black finish. It’s ideal for homeowners who want to tidy up the look of their drive without the cost of resurfacing.


Why Use ASH FINISH?

  • Gives your driveway or path a clean, uniform look

  • Covers up repairs and patchy areas

  • Helps protect against oil stains and surface wear

  • Quick drying – ready for a second coat in just 2 hours

  • Water-based and easy to clean up


It’s perfect for older asphalt, also known as hot mix, and ideal for DIYers wanting to improve kerb appeal without a huge project.


NOVEX Ash Finish - Asphalt Recolouring
NOVEX Ash Finish - Asphalt Recolouring

How to Use It – A Quick Guide

  1. Prep the surface properly:

    This is the most important step. Make sure the surface is clean, dry and free from moss, mould, oil, or dirt.We recommend cleaning with NOVEX TREAT-IT and water blasting if possible. For tough stains like oil, use an alkaline cleaner and let the surface dry fully before painting.

  2. Choose the right day: Only apply when temperatures are above 10°C, with no rain forecast for 24 hours. Avoid painting in direct sun or on very hot days, especially on roofs or dark driveways.

    Stir and apply

  3. Stir the paint well. Start with a thinned coat (50:50 with water) to help it soak in. Once dry, apply a second coat straight from the pail. Use a roller, brush, or airless spray. For high traffic areas, a third coat will offer better durability.

  4. Let it cure: Dry to touch in 30 minutes, recoat after 2 hours. Wait overnight before walking on it, and at least 48 hours before driving on it.


Helpful Tips

  • Always test the colour first on a small patch to make sure it’s the finish you want.

  • If using more than one pail, blend batches together as you go to avoid colour variation.

  • Don’t apply if it’s too hot or too cold—this can affect how the product works.


With NOVEX ASH FINISH, refreshing your asphalt can be a straightforward DIY project. A little effort upfront with prep goes a long way to getting a great-looking result that lasts.

Available in Test Pots, 4L and 10L.For best results, always follow the full instructions on the container or check with your local NOVEX stockist.

Comments

bottom of page