Road Marking Paint
Highway Chlorinated Rubber Borne
Novex Road Marking Paint | Highway Chlorinated Rubber Borne
Chlorinated, solvent-borne, rubber-modified road marking paint generally has better adhesion and, thus, a higher level of durability than normal alkyd road marking paints, especially on concrete.
Typical Uses:
-
Used on bituminous and concrete substrates such as tennis courts, car parks, main highways, city streets and airport runways.
-
For application to road surfaces with a relatively high vehicle traffic count.
-
For road marking where good glass bead holding is required.
-
As a carpark paint over both concrete and bituminous substances.
-
Preparation:
Surface Preparation:
-
Surfaces must be clean, dry, free from oil, grease, lichen, etc before application.
-
Can be applied directly to bare, un-primed or unsealed surfaces.
-
To aid adhesion, prime surface with Highway Road Marking Adhesion Promoter.
Application Guidelines:
-
Stir thoroughly before use.
-
Can be applied by brush, roller or spray. Because of the fast drying nature of the standard Chlorinated Rubber Road Marking Paint it is recommended to be spray applied.
-
May be thinned up to 5% with Xylene/Toluene to aid application.
-
It can be brush applied but with difficulty. It dries so fast it must be wiped on and then left alone as it can surface dry in seconds. It can also be thinned slightly with thinners to slow the drying and make brushing easier but getting a thick layer onto the surface is still important.
-
First coast application to semi new or aged hot mix on car parks or tennis courts etc, apply a dust coat of approximately 50 Microns DFT, leave to dry for 24 hours minimum and then apply second coat to desired film build.
Available: 20 Litre, 200 Litre Colours: White or Yellow Refer to our Tech Data sheet for more detailed information.
Coverage approx
2.2 - 3.6 sqm per litre
Recoat time
24 hours
Water and soap
clean up
Road Marking Paint Colours
White
Yellow
Road Marking Paint
A high-performance, water-based acrylic road and line marking paint designed for quick drying, excellent adhesion, and superior wear resistance on bitumen and concrete surfaces. Available in two colours Yellow and White.
IDEAL FOR USE ON: Roads, parking lots, factory floor lines, and other high-traffic areas where durable, long-lasting paint is essential.